Exterior Wall Insulation Fiberglass Mesh/Phenolic Resin-Coated Fiberglass Mesh for Grinding Wheel/Fiberglass Mesh for Roof

• Customization: Available
• Shape: Fiberglass Mesh
• Fiber Characteristics: E-Glass
• Model NO.: R-WG
• Fiber Appearance: Staple-Fibers
• Glass Composition: E-Glass
• Grade: a
• Color: White/Yellow/Blue
• Transport Package: Plastic Film
• Specification: 100% fiberglass
• Trademark: NJEFG
• Origin: China
• HS Code: 7019590000
• Package Size: 50.00cm * 50.00cm * 40.00cm
• Package Gross Weight: 35.000kg

Product Description

Fiberglass mesh


Fiberglass alkali-resistant mesh is on the basis of C-glass or E-glass fiberglass weaved fabric, then coated with alkali-resistant liquid. It possesses properties of high strength, good cohesion, and anti-alkali. Thus, fiberglass mesh is the ideal construction material for EIFS (exterior insulation and finish system), widely used for wall reinforcement, roof waterproof. It can also reinforce cement, plastic, bitumen, plaster, marble, mosaic, etc. It is also known as a soft steel bar.

Fiberglass mesh is a neatly woven, crisscross pattern of fiberglass thread that is used to create new products such as tape and filters. When it is used as a filter, it is not uncommon for the manufacturer to spray a PVC coating to make it stronger and last longer. The most common place to find fiberglass mesh is in tape products.
Drywall finishers use the mesh frequently. In fact, it is common to replace the paper tape used to float the joint between two pieces of drywall. The mesh that drywall finishers use comes on a roll just like paper drywall tape. The added benefit for the drywall finisher is to roll out the mesh over a great distance before having to apply the first coat of joint compound. Not only does it help them in this manner, but it also causes a stronger bond between the joint compound, the tape, and the wall.

Drywall finishers also use this tape to patch holes. The most common hole in the drywall generally occurs where a doorknob has hit a wall too many times. If it is only slightly damaged, a couple of short pieces of the tape will be formed into a square and placed over the hole. A joint compound will then be applied directly to it. If the hole is too large to patch with fiberglass mesh alone, a piece of metal flashing can be added behind the tape before applying the joint compound. Construction work is not the only use for fiberglass mesh.

As a filtering system, alkali-resistant fiberglass mesh works really well. As the water flows through it, the mesh catches even the smallest impurities. In addition to this use, it can also be used as a mosquito net.

Finally, fiberglass mesh is sometimes woven into protective clothing used by those who work with dangerous chemicals or firefighters. Tightly woven mesh is put together and shaped into jackets that firemen wear when they are battling ablaze. It protects them from any fire that might ignite their clothing while fighting a fire. Fiberglass mesh can also be used in mold making and as protection against corrosives.

Fiberglass mesh is a C glass fiber yarn as a base cross, is coated with an alkali-resistant latex, excellent alkali resistance, warpage, and has a tensile strength characteristic of the weft.

Specification
 

Unit weight	30g/m2, 45g/m2, 60g/m2, 75g/m2, 90g/m2, 110g/m2, 125 g/m2, 145 g/m2, 160g/m2, 300g/m2, 500g/m2
Size	1x1mm, 2x2mm, 3x3mm, 4x4mm, 5x5mm, 6x6mm…2x12mm
Width	5cm, 10cm, 1m, 1.2m, 1.5m…2.1m
Length	50m 100m, 200m, subject to customer's requirements.
Color	white, blue, green, etc.
Woven Structure	Leno

Features

1. High tensile strength
2. Alkali resistant
3. Good cohesion
4. Can firmly combine with EPS board



Application

1. Fiberglass mesh is used for wall reinforcement.
2. Fiberglass mesh is an ideal material for exterior wall heat insulation.
3. Fiberglass mesh can be applied to bitumen as roof waterproofing material, so as to strengthen the tensile strength and extend the lifetime of bitumen.
4. For Reinforcement of marble, mosaic, stone, and gypsum board.
 

Packing
Shrink film, then in cartons.

 

Company Profile

Established in 2003, NANJING EFG CO., LTD has been professional in glass fiber and polyester fiber nonwoven mat created her vision that " Create a well-known international brand in the field of non-woven fiberglass material ", the products fiberglass mat, polyester mat, coated mat, reinforced mat are delivered to Europe, Middle East, North Africa, Asia, USA, Latin America, customer use NJEFG®, products for waterproof, filter, wall decoration, gypsum board, FRP surface, etc., quality and service are satisfied by customer.

With professional engineers and advanced producing lines, NJEFG®, always focus on offering customization to customers for special demands and developing new products for the market.

Every employee in NJEFG® has interjected faith into the daily work and life. When you cooperate with NJEFG®, you will find that you are working with a professional team with active and high efficient service, stable quality, and a memorable reputation.

NJEFG® products cover the market of Middle East, North Africa, southeast Europe, North Europe. To have good service to the customers NJEFG runs series of branch companies and joint ventures in Hong Kong, Algeria, and Iran.

 

Certifications

Why choose us

Nanjing EFG Co., Ltd, as one of the fiberglass materials suppliers in China, has been a professional manufacturer of fiberglass and polyester non-woven fabric for more than 15 years, we have been committed to providing a full range of products for our customers.
We also customize high-quality, cost-effective products and seek to enhance our services with a view to delivering a positive and delightful customer experience.
According to your needs, what we can provide is not only strategic planning, reliable solution, consultancy, and guidance, but also detailed implementation actions according to your situation.
To get more information about our capabilities, please contact us.
 

FAQ

Q1.What's the MOQ?
A: Usually 10000SQM format or 1 Ton for glass fiber.

Q2.How can I get a sample?
A: Normally small samples can be sent free of charge and customers just need to bear the shipping charge, or you can provide your DHL, FEDEX, EMS, UPS courier account number to us. For bigger sizes, it depends.

Q3.How do you do quality control?
A: We have the most professional tech team and experienced workers, from material choosing, production process to final packing, all are under strict control to make sure you can sure you can get the qualified fiber products.

Q4.Can your company customize products?
A: Yes, We usually discuss with customers and help them find solutions.

Q5. How long does the sample take you to check quality?
A: Usually a sample will be prepared within one week after the specification is agreed.

Q6.What about your delivery time? Can we receive our goods on time?
A: Usually around 2-3 weeks after the order is confirmed. The exact delivery time depends on order quantity and Off-season/ busy season.