Fiberglass joint tape
1. Fiberglass joint tape is made by cutting 45~50g/m2 of fiberglass tissue into certain width, which is a special product used as joint tape on the wall crack or gypsum board connections.
2. The size of this fiberglass joint tape is usually 50mmx 75m/roll; and we can produce it according to your special requirement on width and length, of course.
3. This fiberglass joint tape will not make bubbles under construction, and it is well-compatible with many types of wall and ceiling materials, such as coatings and gypsum board, therefore it is an ideal material to replace paper joint tape. I
4. t is well known that fiberglass is fire-resistant, mold-resistant, and indoor environment-friendly without any toxic chemical odor or granule release.
5. Our fiberglass tissue tape has achieved the standard of mildew-proof ASTM D3273, with a mildew-proof grade of 10. In addition, the tensile strength of fiberglass joint tape is higher by 70%~80% than paper joint tape.
6. This fiberglass joint tape has become very popular in construction and decoration for many years.
7. When you use this fiberglass joint tissue, the wall or gypsum ceiling becomes flat and smooth at wall cracks or gypsum board joints; and you use less coating materials, saving cost and polishing time with easy construction.
| Product code |
Unit Weight (g/m2) |
LOI (%) |
MD/CD Tensile Strength (N/50mm) |
Moisture Content
(%) |
Thickness
(mm) |
| FT-50/T-Y |
50 |
18 |
130/70 |
0.5 |
0.5 |
Characteristics
1. Easy soakage and good adhesion to plasterboard
2. Moisture-resistant, mold-resistant
3. Healthy and environmentally friendly material
4. Each roll can be in one plastic bag
For wall crack or gypsum board connections.
- Roll Packaging: PE plastic film, Carton.
- Pallet packaging: Pallets should NOT be stacked in more than 2 layers.
- The pallet is free of fumigation, fumigation certificate is available.
Audited Supplier 
){kind=link}