Fast and Easy to Install Ceramic Fiber Module

• Usage: High Temperature Insulating Material
• Temprature Classification: 1260℃
• Chemical Composition: SiO2, Al2O3.SiO2, Al2O3
• Shape: Ceramic Fiber Blanket
• Manufacturing Technique: Spray Silk Rug
• Kind: Ordinary Ceramic Fiber
• Model NO.: 1260
• Density: 220kg/M3
• Transport Package: PE Plastic Film with Pallet
• Specification: 12′′x12′′x12′′
• Trademark: NJEFG
• Origin: China
• HS Code: 6806101000
• Production Capacity: 10000000sqm/Year

Product Description

 

Product Description

Ceramic Fiber Module is made from ceramic fiber blanket. These modules are specially designed to meet or improve the thermal insulation requirements of industrial furnaces. Ceramic fiber modules are produced with various anchoring systems to enable quick and efficient installation in most furnace linings. Modules have the highest insulating value achievable in ceramic fiber. Each module is a continuous folded blanket under compression. Module linings prevent heat loss, increasing furnace productivity and reducing maintenance costs.
Characteristics

1. Fast and easy installation
2. Lower heat storage and fuel costs
3. This design creates a very light lining, less steel required
4. Several anchor systems

Customization

We install the welding stud with a rubber protective sleeve into the module in advance, which greatly saves the installation time and labor cost for the customer.  
 

 

Product Parameters

 

Classification Temperature		1260	1427
Code		EFGTX-1260M	EFGTX-1427M
Shrinkage on Heating(%)		1000ºC×24h≤-3	1350ºC×24h≤-3
Theoretical Density (kg/m3)		200-220	200-220
Tensile Strength MPa (128kg/m3)		0.06	0.06
Chemical composition (%)	Al2O3	45-46	39-40
	Al2O3+SiO2	97	-
	Al2O3+SiO2+ZrO2	-	99
	ZrO2	-	15-17
	Fe2O3	<1.0	0.2
	K2O+Na2O	≤0.5	0.2
Dimension (mm)		300x300x100; 300x300x150;300x300x200; 300x300x300

REMARKS: 
1. Other dimensions available according to negotiation
2. The technical data above is for reference only. All data represent typical results of standard tests conducted under controlled conditions. As such the information is intended only as a general guide for specifications and design estimates.   
 

Application

Ceramic industry
Low mass kiln cars; Continuous and batch kilns; Door Linings; Glazing, porcelain furnace linings
Steel Industry
Ladle pre-heaters and covers; Heat treat furnace; Soaking pit covers and seals
Power Generation
Duct lining; Heat recovery steam system; Boiler insulation; Stack linings
Refining and Petrochemical
Ethylene furnace roof and walls; Pyrolysis furnace lining; Reformer furnace roof and walls; Boiler lings
Others
1. Incineration equipment
2. Burner blocks
3. Induction furnace covers
4. Glass tempering furnace

Packaging & Shipping

1. Outer PE film with pallet.
2. The pallet is free of fumigation, a fumigation certificate is available.
 

 

 

Company Profile

Established in 2003, has been professional in glass fiber and polyester fiber non-woven mat created her vision that " Create a well-known international brand in the field of non-woven fiberglass material ", the products fiberglass mat, polyester mat, coated mat, reinforced mat are delivered to Europe, Middle East, North Africa, Asia, USA, Latin America, customer use NJEFG®, products for waterproof, filter, wall decoration, gypsum board, FRP surface, etc., quality and service are satisfied by customer.
With professional engineers and advanced producing lines, NJEFG®, always focus on offering customization to customers for special demands and developing new products for the market.
Every employee in NJEFG® has interjected faith into the daily work and life. When you cooperate with NJEFG®, you will find that you are working with a professional team with active and high efficient service, stable quality, and memorable reputation.

 

 

NJEFG® products cover the market of Middle East, North Africa, southeast Europe, North Europe. To have good service to the customers NJEFG runs a series of branch companies and joint ventures in Hong Kong, Algeria, and Iran.

 

Certifications

 

 

Why choose us

Nanjing EFG Co., Ltd, as one of the fiberglass materials suppliers in China, has been a professional manufacturer of fiberglass and polyester non-woven fabric for more than 15 years, we have been committed to providing a full range of products for our customers.
We also customize high-quality, cost-effective products and seek to enhance our services with a view to delivering a positive and delightful customer experience.
According to your needs, what we can provide is not only strategic planning, reliable solution, consultancy, and guidance, but also detailed implementation actions according to your situation.
To get more information about our capabilities, please contact us.
 

FAQ

Q1.What's the MOQ?
A: Usually 10000SQM for mat or 1 Ton for glass fiber.

Q2.How can I get a sample?
A: Normally small samples can be sent free of charge and customers just need to bear the shipping charge, or you can provide your DHL, FeDeX, EMS, UPS courier account number to us. For bigger sizes, it depends.

Q3.How do you do quality control?
A: We have the most professional tech team and experienced workers, from material choosing, production process to final packing, all are under strict control to make sure you can sure you can get the qualified fiber products.

Q4.Can your company customize products?
A: Yes, We usually discuss with customers and help them find solutions.

Q5. How long does the sample take you to check quality?
A: Usually a sample will be prepared within one week after the specification is agreed upon.

Q6.What about your delivery time? Can we receive our goods on time?
A: Usually around 2-3 weeks after the order is confirmed. The exact delivery time depends on order quantity and Off-season/ busy season.