| Shape: | Fiberglass Mesh |
|---|---|
| Fiber Characteristics: | E-Glass |
| Diameter of Filaments: | Primary Fibers |
| Fiber Appearance: | Staple-Fibers |
| Glass Composition: | E-Glass |
| Grade: | a |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Fiberglass alkali-resistant mesh is on the basis of C-glass or E-glass fiberglass weaved fabric, then coated with alkali-resistant liquid. It possesses properties of high strength, good cohesion, and anti-alkali. Thus, fiberglass mesh is the ideal construction material for EIFS (exterior insulation and finish system), widely used for wall reinforcement, and roof waterproofing. It can also reinforce cement, plastic, bitumen, plaster, marble, mosaic, etc. It is also known as a soft steel bar.
Fiberglass mesh is a neatly woven, crisscross pattern of fiberglass thread that is used to create new products such as tape and filters. When it is used as a filter, it is not uncommon for the manufacturer to spray a PVC coating to make it stronger and last longer. The most common place to find fiberglass mesh is in tape products.
Drywall finishers use the mesh frequently. In fact, it is common to replace the paper tape used to float the joint between two pieces of drywall. The mesh that drywall finishers use comes on a roll just like paper drywall tape. The added benefit for the drywall finisher is to roll out the mesh over a great distance before applying the first coat of joint compound. Not only does it help them in this manner, but it also causes a stronger bond between the joint compound, the tape, and the wall.
Drywall finishers also use this tape to patch holes. The most common hole in the drywall generally occurs when a doorknob has hit a wall too many times. If it is only slightly damaged, a couple of short pieces of the tape will be formed into a square and placed over the hole. A joint compound will then be applied directly to it. If the hole is too large to patch with fiberglass mesh alone, a piece of metal flashing can be added behind the tape before applying the joint compound. Construction work is not the only use for fiberglass mesh.
As a filtering system, alkali-resistant fiberglass mesh works really well. As the water flows through it, the mesh catches even the smallest impurities. In addition to this use, it can also be used as a mosquito net.
Finally, fiberglass mesh is sometimes woven into protective clothing used by those who work with dangerous chemicals or firefighters. Tightly woven mesh is put together and shaped into jackets that firemen wear when they are battling a blaze. It protects them from any fire that might their clothing while fighting a fire. Fiberglass mesh can also be used in mold making and as protection against corrosives.
Fiberglass mesh is a C glass fiber yarn as a base cross, is coated with an alkali-resistant latex, excellent alkali resistance, warpage, and has a tensile strength characteristic of the weft.
| Unit weight | 30g/m2, 45g/m2, 60g/m2, 75g/m2, 90g/m2, 110g/m2, 125 g/m2, 145 g/m2, 160g/m2, 300g/m2, 500g/m2 |
| Size | 1x1mm, 2x2mm, 3x3mm, 4x4mm, 5x5mm, 6x6mm…2x12mm |
| Width | 5cm, 10cm, 1m, 1.2m, 1.5m…2.1m |
| Length | 50m 100m, 200m, subject to customer's requirements. |
| Color | white, blue, green, etc. |
| Woven Structure | Leno |
1. Fiberglass mesh is used for wall reinforcement.
2. Fiberglass mesh is an ideal material for exterior wall heat insulation.
3. Fiberglass mesh can be applied to bitumen as roof waterproofing material, so as to strengthen the tensile strength and extend the lifetime of bitumen.
4. For Reinforcement of marble, mosaic, stone, and gypsum board.
Shrink film, then in cartons. Delivery
Fiberglass AGM mat will be loaded into the container in the factory, then delivered to the seaport, and finally be shipped to the Customer's port by MSK, MSC, CMA, COSCO, YANGMING, APL, etc.
Q.What are your main products?
A: Fiberglass mesh; Fiberglass cloth, Fiberglass tape; Fiberglass tissue mat; Reinforced fiberglass mat; Spunbond polyester mat, etc.
Q.How can I get a sample?
A: Normally small samples can be sent free of charge and customers just need to bear the shipping charge, or you can provide your DHL, FEDEX, EMS, and UPS courier account number to us. For bigger sizes, it depends.
Q.How you do quality control?
A: We have the most professional tech team and experienced workers, from material choosing, and production process to final packing, all are under strict control to make sure you can sure you can get qualified fiber products.
Q. Can your company customize products?
A: Yes, We usually discuss with customers and help them find solutions.
Q. How long does the sample take you to check quality?
A: Usually a sample will be prepared within one week after the specification is agreed.
Q.What about your delivery time? Can we receive our goods on time?
A: Usually around 2-3 weeks after the order is confirmed. The exact delivery time depends on order quantity and Off-season/ busy season.
Q. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}