Wall Materials Application Roofing Fiber Glass Mesh

• Customization: Available
• Shape: Fiberglass Mesh
• Fiber Characteristics: E-Glass
• Model NO.: Fiberglass Mesh
• Fiber Appearance: Staple-Fibers
• Glass Composition: E-Glass
• Grade: a
• Color: White/Yellow/Blue
• Transport Package: Plastic Film
• Specification: 100% fiberglass
• Trademark: NJEFG
• Origin: China
• HS Code: 7019590000

Product Description

Fiberglass alkali-resistant mesh



Fiberglass alkali-resistant mesh is on the basis of C-glass or E-glass fiberglass woven fabric, then coated with alkali-resistant liquid. It possesses properties of high strength, good cohesion, and anti-alkali. Thus, fiberglass mesh is the ideal construction material for EIFS (exterior insulation and finish system), widely used for wall reinforcement, roof waterproof. It can also reinforce cement, plastic, bitumen, plaster, marble, mosaic, etc. It is also known as soft steel bar.

Fiberglass mesh is a neatly woven, crisscross pattern of fiberglass thread that is used to create new products such as tape and filters. When it is used as a filter, it is not uncommon for the manufacturer to spray a PVC coating to make it stronger and last longer. The most common place to find fiberglass mesh is in tape products.
Drywall finishers use the mesh frequently. In fact, it is common to replace the paper tape used to float the joint between two pieces of drywall. The mesh that drywall finishers use comes on a roll just like paper drywall tape. The added benefit for the drywall finisher is to roll out the mesh over a great distance before having to apply the first coat of joint compound. Not only does it help them in this manner, but it also causes a stronger bond between the joint compound, the tape and the wall.

Drywall finishers also use this tape to patch holes. The most common hole in the drywall generally occurs where a doorknob has hit a wall too many times. If it is only slightly damaged, a couple of short pieces of the tape will be formed into a square and placed over the hole. A joint compound will then be applied directly to it. If the hole is too large to patch with fiberglass mesh alone, a piece of metal flashing can be added behind the tape before applying joint compound. Construction work is not the only use for fiberglass mesh.

As a filtering system, alkali resistant fiberglass mesh works really well. As the water flows through it, the mesh catches even the smallest impurities. In addition to this use, it can also be used as a mosquito net.
Finally, fiberglass mesh is sometimes woven into protective clothing used by those who work with dangerous chemicals or firefighters. Tightly woven mesh is put together and shaped into jackets that firemen wear when they are battling a blaze. It protects them from any fire that might ignite their clothing while fighting a fire. Fiberglass mesh can also be used in mold making and as protection against corrosives.

Fiberglass mesh is a C glass fiber yarn as a base cross, is coated with an alkali-resistant latex, excellent alkali resistance, warpage, and has a tensile strength characteristics of the weft.


Specification
 

Unit weight	30g/m2, 45g/m2, 60g/m2, 75g/m2, 90g/m2, 110g/m2, 125 g/m2, 145 g/m2, 160g/m2, 300g/m2, 500g/m2
Size	1x1mm, 2x2mm, 3x3mm, 4x4mm, 5x5mm, 6x6mm…2x12mm
Width	5cm, 10cm, 1m, 1.2m, 1.5m…2.1m
Length	50m 100m, 200m, subject to customer's requirements.
Color	white, blue, green, etc.
Woven Structure	Leno

Features

1. High tensile strength
2. Alkali resistant
3. Good cohesion
4. Can firmly combine with EPS board



Application

1. Fiberglass mesh is used for wall reinforcement.
2. Fiberglass mesh is ideal material for exterior wall heat insulation.
3. Fiberglass mesh can be applied to bitumen as roof waterproofing material, so as to strengthen the tensile strength and extend life time of bitumen.
4. For Reinforcement of marble, mosaic, stone and gypsum board.
 

Packing

Shrink film, then in cartons.

Markets

Nanjing EFG CO., LTD. has delivered this product to USA, EU, Middle East, North Africa, South Africa, Asian customers with ensured quality and rich experience for export deliveiry.  
Nanjing EFG CO., LTD welcomes cooperation from all of the world.

Delivery

Fiberglass AGM mat will be loaded into container in factory, then be delivered to the sea port, finally be shipped to Customer's port by MSK, MSC, CMA, COSCO, YANGMING, APL,  etc.


Payment

LC, T/T, CAD, PAYPAL, WESTERN UNION, ETC.

After sales service

Nanjing EFG CO., LTD tracks cargo of every shipment till customer uses the fibreglass mat, and offer any help for customer's demand in any time.

FAQ:
Q.What are your main products?
A:Fiberglass mesh;Fiberglass cloth,Fiberglass tape;Fiberglass tissue mat;Reinforced fiberglass mat;Spunbond polyester mat etc.
Q.How can I get a sample?
A: Normally small samples can be sent free of charge and customers just need to bear the shipping charge, or you can provide your DHL,FEDEX,EMS,UPS courier account number to us. For bigger sizes, it depends.
Q.How you do quality control?
A: We have the most professional tech team and experienced workers, from material choosing, production process to final packing ,all are under strictly control to make sure you can sure you can get the qualified fiber products.
Q.Can your company customize products?
 A: Yes, We usually discuss with customers and help them find solutions.
Q. How long does the sample take from you to check quality?
A: Usually a sample will be prepared within one week after specification agreed.
Q.What about your delivery time? Can we receive our goods on time?
A: Usually around 2-3 weeks after order confirmed. Exact delivery time depends on order quantity and Off-season/ busy season.
Q. Do you test all your goods before delivery?
A:Yes, we have 100% test before delivery.